GT6000 - Projector LCD, 5300 ANSI lumens, SXGA+ 1400x1050, 700:1
It is also possible to provide high brightness projection at a maximum of 10.600 ANSI lumens through a stack configuration with two projectors.
With Advanced AccuBlend, NEC's unique resolution technology, images can be displayed in higher order resolutions up to UXGA (1600 x 1200 pixels).
New LSIs for sharper, more vivid image quality
This projector uses two new NEC LSIs. The first is a 10-bit video decoder LSI that significantly lowers cross colours and cross luminance caused by three dimensional Y/C separation (with NTSC signals), and the second provides a Contrast Enhancement function that uses the characteristics of the human eye to achieve picture quality with a greater feeling of contrast. For optimum quality with movies and video, the projector also incorporates a high performance LSI for de-interlacing using Faroudja DCDiTM technology. The result is reproduction of all images with extremely high contrast (700:1) and overall quality.
The long life lamp (GT60LPS) running in Eco mode provides many hours of continuous operation.
The long life lamp can be used in conjunction with either of the dual lamp modes: Normal mode and Eco Mode.In the Eco Mode or with the long-life lamp, the projector affords many hours of continuous operation and drastically reduces the cost and labour of replacing lamps. This projector is the best choice for the diverse needs of graphic artists or for controlling and monitoring where the projector will be in use for many hours - mini theatres, halls, art galleries, museums, libraries and video libraries - anywhere high definition images with outstanding brightness are required.
3D Reform simply corrects distorted images projected from an angled position
The 3D Reform function, using the newly developed ASIC which implements NEC's unique image conversion technology, corrects 3D distortions, not obtainable with four direction trapezoid correction, to project more beautiful images. Distorted images can be corrected by clicking the four corners of the image on the screen with a USB mouse, operating the remote controller, or the button on the main unit.
Trapezoidal distortion can be corrected vertically +/- 40 degrees and horizontally +/- 30 degrees. Since the correction can be made in one-degree increments, precision image correction is possible.
Since the corrected data can be stored, you can display square images anytime in places, such as a conference room, where the projector is permanently installed.
With the Geometric Correction function capable of projecting square images onto cylindrical or spherical screens, applications for large-sized projection are expanded.
Electric Zoom and Focus, Power Driven Lens Shift function (in both vertical and horizontal directions) is standard and five types of optional lenses are available.
In addition to the Zoom and Focus function for adjusting the zoom and focus of the projection lens, the Power Driven Lens Shift function adjusts the position of the projected image without changing the position of the projector. Since the lenses can be shifted in both the vertical and horizontal directions and the lens position for the respective Zoom, Focus, and Lens shift input signals can be individually stored in the memory, projector installation is more flexible.
Nine types of optional lenses from the short focus type to the long focus type are available. Choose the optimum lens according to the installation location of the projector, such as a conference room, lecture hall, concert hall, or event venue.
This supports wireless and wired LAN. The lamp lifetime and error messages will be sent via e-mail notification.
The LAN port (RJ-45) is standard. By using a commercially available wired LAN cable (Ethernet cable), collectively manage and control the projector from your PC through a network. If you install the optional wireless LAN card (SWL-2100N) in the PJ card slot on the projector and set up a network connection, you can project PC images supporting wireless LAN without using a video signal cable. For a conference using multiple PCs, it is not necessary to connect cables, and the speaker does not need to move. Furthermore, the Mail Notification Function transmits information about the lamp lifetime or error messages from the projector to three destinations for effective maintenance services.
The Mail Notification Function and the HTTP Server Function are not available for Macintosh computers.
USB memory and a USB memory card reader can be used.
A flash memory card and USB memory can be connected to project images stored in USB memory or used as a protection key. Furthermore, by connecting a commercially available USB memory card reader, you can handle data in various kinds of memory cards or use various kinds of memory cards as a protection key.
A variety of input ports and a comprehensive array of system control interfaces
This projector supports input signals including BNC, DVI-D, analogue RGB, component, S-video, and composite, as well as the high definition standards of BS broadcasting (D1 to D5). For system control, it is possible to configure the system to the users needs including operation and control of the status of the projector through USB, the link mode, and wireless and wired LAN (RJ-45) as well as RS-232C.
Furthermore, two optional slots accommodate optional SDI and RGB boards for superior system expandability.
Seamless Switch provides image transitions when switching the signal source.Select from three options: Wipe overlays the image in any direction from side to side or top to bottom; Box in contracts the image from the edge to the center; and Box out expands the image from the center to the edge.Select the transition speed from the three options of High, Standard, and Low.
NEC GT6000. Projector helderheid: 5300 ANSI lumens, Projectietechnologie: LCD, Typische contrastverhouding: 700:1. Levensduur lamp: 2000 uur, Vermogen lamp: 275 W, Serviceleeftijd van de lamp (economische mode): 3000 uur. Frequentiebereik verticaal: 48 - 120 Hz, Frequentiebereik horizontaal: 15 - 100 kHz. Beeldscherm: LCD, Beeldschermdiagonaal: 3,56 cm (1.4"). Typisch stroomverbruik: 800 W, Stroomverbruik (in standby): 1 W