- - Features Dante networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
- - Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
- - Provides 48V Phantom power supply to condenser microphones
- - AES67 support
- - Easy to use and set up – User can use ”Dante Controller” for the simple setup
- - Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
- - Supports HDMI 2.0 input with HDCP 2.2 compliant – the HDMI input can de-embed HDMI stereo audio to the Dante network
- - Supports HDMI 2.0 local output – the VE66DTH can embed the Dante audio into HDMI output
- - Supports PoE – power can be supplied by a compatible PSE device through Ethernet cable
6 x 6 Dante Audio Interface with HDMI
ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. The VE66DTH transmits and receives up to 6-channel of audio inputs and outputs via a Dante network – the audio inputs can support not only the line input but also the dynamic and condenser microphones at the same time. Additionally, the device can also provide condenser microphones with 48V Phantom power supply. With its built-in PoE (Power over Ethernet), the VE66DTH can be powered by a compatible PSE device through Ethernet cable. Moreover, the VE66DTH provides flexible audio capability with audio de-embedding and embedding. It can de-embed HDMI stereo audio signals to the Dante networking system and embed Dante audio signals into the HDMI output.
1x VE66DTH 6 x 6 Dante Audio Interface with HDMI
6x 5-Pole Terminal Blocks
4x Foot Pads
1x KC06-0040-100G Mounting Kit
1x 0AD8-1F05-30M1 Power Adapter
1x User Instructions
ATEN VE66DTH-AT-G, 5 V, 8,9 W, 174,2 mm, 154,9 mm, 28,8 mm, 1,1 kg
ATEN VE66DTH-AT-G. Operating voltage: 5 V, Power consumption (typical): 8,9 W. Width: 174,2 mm, Depth: 154,9 mm, Height: 28,8 mm. Package width: 95 mm, Package depth: 265 mm, Package height: 220 mm. Master (outer) case net weight: 5,5 kg, Master (outer) case width: 232 mm, Master (outer) case length: 500 mm
